컨텐츠 바로가기


product


이전 제품 보기

다음 제품 보기

크게보기

[P0000FQR] JeffTron Active Brake 2 For Ver.2 Gerbox with Wiring 품절 적립금

() 해외배송 가능

JeffTron Active Brake 2 For Ver.2 Gerbox with Wiring 기본 정보
판매가
소비자가 0원
적립금
  • 780 (780.00%)
  • 무통장 결제시 적립금 ( %) 무
  • 카드 결제시 적립금 ( %) 카
  • 실시간 계좌 이체시 적립금 ( %) 실
  • 적립금 결제시 적립금 ( %) 적
  • 휴대폰 결제시 적립금 ( %) 휴
무이자할부
제조사 JeffTron
원산지 체코 공화국
상품코드 P0000FQR
수량

updown

국내/해외배송
SNS 상품홍보
QR코드  

이미지저장 | 코드URL복사

QR코드 보내기 페이스북으로 보내기 트위터로 보내기 미투데이로 보내기 요즘로 보내기

장바구니 담기 관심상품 등록 추천 메일 보내기

쇼핑 계속하기 바로 구매하기

event

상품상세정보

 M160 Spring에 25A까지 버티는 능력을 가지고 있습니다.

 Active Brake는 스위치가 끊기는 시점에 브레이크가 걸려 스프링이 전전한 상태로 멈출 수 있는 회로이며, 기본적으로 FET기능도 포함되어있습니다.

 고급 배선이 작업되어있어 장착을 쉽게 한 버젼입니다.

Product description: Active brake - V2 with wiring

Professionally made mosfet with motor active braking designed for airsoft electric guns (AEG).
Device increases gun rate of fire and battery holds longer, than with basic wiring.
In semi fire mode piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF).
Active break solves multiple shots in semi mode with weapons with very high rate of fire (ROF).
It is fully integrated inside the gearbox version 2 instead of the original trigger contacts, compatible with Tokyo Marui standard.

SPECIFICATIONS:
- Active brake build on trigger contacts from SHS company
- Easy installation inside the gearbox version 2
- Presoldered wires allows faster and easier installation into the gun, it is long enough for all kind of weapons. Simply cut wires to the required length and attach connectors (included in package)
- On the devices are presoldered high quality 2 black wires 1,5 qmm (AWG16) with with thin and hard MPPE insulation, length 300 mm to the motor and 700 mm to the battery. The blue wire 0.34 qmm (AWG24) with a length 1000 mm is used for connection anywhere on the red cable
- In package is included 1000 mm red wire 1,5qmm (AWG16) with with thin and hard MPPE insulation
- Wiring is designed to lead into the stock, but it can go to the front under condition to turn around black battery wire on the board (resolder it)
- Board with electronics is coated with lacquer, it protects device against water
- If you want to use your own wires, choose device without wiring
- Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s). For higher load please use Active Brake II (it is outside gearbox)
- Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- No current consumption in the idle mode
- No sparking on switch contacts
- Active braking uses the excess energy from the motor to stop it. The braking effect is the most powerful with high torgue motor
- In auto fire mode piston stops in random position due the mechabox design
- For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox

DEVICE INSTRUCTIONS: you can download installation manual in English here [PDF, 864.67 kB]
- mosfet with active brake on trigger contacts with wiring
- trigger switch
- screw, pad (for screw to keep device in the position)
- DeanT connector male
- 30A mini fuse
- 4x faston female 2,8mm
- 6x black heat shrink tube 3,2mm - length 20mm
- 3x black heat shrink tube 4,8mm - length 20mm
- installation manual in English

배송 정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :


상품 사용 후기

상품의 사용후기를 적어주세요.

상품의 사용후기
번호 제목 작성자 작성일 조회 평점
1 좋네요. 좋아 김형준 2019-10-07 97 5점

모두 보기 사용 후기 쓰기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

상품의 사용후기
번호 카테고리 제목 작성자 작성일 조회
6 이제품 장착 서능 문우ㅏ [1] 이민규 2021-07-11 32
5 비밀글 상품문의 [1] 손성훈 2021-02-18 2
4 비밀글 제품 문의 변경현 2020-11-25 2
3 부품누락문의 파일첨부 김상준 2020-05-01 63
2 비밀글 장착공임 하시나요 [1] 신재성 2020-04-02 3

모두 보기 상품 Q & A 쓰기