스위치 접점 보호 회로 스위치 박스 킷트 입니다. 단발을 많이 사용하는 분들께 추천드리며, 스위치 수명이 최대 1,000배 증가합니다.
특히, 유럽산 JeffTron의 내구성과 고속 스위칭 능력은 타사의 것보다 월등히 뛰어납니다. 매일 같이 사격을 하는 비비탄 사격장에서도 가장 우수한 내구성과 딱딱 끊어지는 스위칭 기능을 보여줬습니다.
앞서 말한대로 FET 고속 스위칭 외 접점 보호 기능과 JeffTron의 것은 타사의 것보다 내구성이 탁월합니다.
Lonex / VFC 전동건에 장착성이 Very Good 입니다.
Product description:Mosfet - V2 with wiring
Professionally made mosfet designed for airsoft electric guns (AEG). Device increases gun rate of fire and battery holds longer, than with basic wiring. It is fully integrated inside the gearbox version 2 instead of the original trigger contacts, compatible with Tokyo Marui standard.
SPECIFICATIONS: - Mosfet build on trigger contacts from SHS company - Easy installation inside the gearbox version 2 - Presoldered wires allows faster and easier installation into the gun, it is long enough for all kind of weapons. Simply cut wires to the required length and attach connectors (included in package) - On the devices are presoldered high quality 2 black wires 1,5 qmm (AWG16) with with thin and hard MPPE insulation, length 300 mm to the motor and 700 mm to the battery. The blue wire 0.34 qmm (AWG24) with a length 1000 mm is used for connection anywhere on the red cable - In package is included 1000 mm red wire 1,5qmm (AWG16) with with thin and hard MPPE insulation - Wiring is designed to lead into the stock, but it can go to the front under condition to turn around black battery wire on the board (resolder it) - Board with electronics is coated with lacquer, it protects device against water - If you want to use your own wires, choosedevice without wiring - Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s). For higher load please useMosfet II(it is outside gearbox) - Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) - No current consumption in the idle mode - No sparking on switch contacts - In auto fire mode piston stops in random position due the mechabox design - For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox
DEVICE INSTRUCTIONS: you can download installation manual in Englishhere[PDF, 761.42 kB] PACKING: - mosfet on trigger contacts with wiring - trigger switch - screw, pad (for screw to keep device in the position) - DeanT connector male - 30A mini fuse - 4x faston female 2,8mm - 6x black heat shrink tube 3,2mm - length 20mm - 3x black heat shrink tube 4,8mm - length 20mm - installation manual in English
WARNING: Installation of this device leave to expert, who could solder and disassemble airsoft gun. Never user soldering gun! We can't guarantee 100% compatibility with all gearboxes, but Mosfet - V2 will fit into standard and common brand's gearboxes without larger modifications.
Copyright ⓒ 2010 인펜트리샵 All rights reserved.
전화 : 010-8644-8450 FAX : 0303-3440-8450
Contact email@example.com for more information.
법인명(상호):유한회사 인펜트리 주소:54830 전라북도 전주시 덕진구 시천로 70-1 (송천동1가) 3층
사업자 등록번호 안내 [766-88-00622] / 통신판매업 신고 제 제2017 전주덕진 0237호
[사업자정보확인] 개인정보보호책임자 :이길용(firstname.lastname@example.org) / 대표자(성명):정기정